- Controlling up to 10 4-Pin PWM Fans
- Equipped with 10 ARGB lighting channels
- Magnetic Design
- Smart Safety Protection
- Support Remote Control

The CORSAIR iCUE ELITE CPU Cooler LCD Display Upgrade Kit transforms your CORSAIR ELITE CAPELLIX CPU cooler into a personalized dashboard, vividly displaying animated GIFs, images, and system stats on a vibrant LCD screen.

Digital RGB Lighting & Fan Speed Controller

RGB Lighting & Digitally-Controlled Fan Channels

The NA-FH1 is a high-quality, smartly-protected 8 channel PWM fan hub that allows up to eight PWM fans to be run and controlled simultaneously via a single PWM motherboard fan header or stand-alone controllers such as the optional NA-FC1. Non-PWM fans can be controlled by adjusting the input voltage. Supporting both 12V and 5V fans with 4-pin PWM and 3-pin connectors, the NA-FH1 is highly flexible and suitable both for PC environments and other 12V- or 5V-based applications. It can be powered either via its S-ATA input (for 12V fans, up to 54W) or 4-pin PWM input (for 5V and 12V fans, up to 24W),

The NM-SD2 is a high-quality Phillips PH2 head screwdriver that is ideal for use with Noctua’s cross recess based SecuFirm™ and SecuFirm2™ mounting systems. Its 150mm long shaft makes it easy to reach the mounting screws of large CPU coolers and thanks to its magnetic tip, fixing screws in space-constrained environments such as tightly packed ITX builds is a breeze.

The NM-M1-MP83 is an enthusiast-grade, multi-socket SecuFirm2+™ mounting-kit that represents an ideal upgrade for users who want to migrate their Noctua CPU coolers to the new, Torx® based SecuFirm2+™ standard or to the latest sockets that their cooler did not yet support at the time of purchase.

The NM-M1-MP78 is an enthusiast-grade, multi-socket SecuFirm2+™ mounting-kit that represents an ideal upgrade for users who want to migrate their Noctua CPU coolers to the new, Torx® based SecuFirm2+™ standard or to the latest sockets that their cooler did not yet support at the time of purchase.

The NA-IS1-14 Sx2 is a set of two 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators.

The NA-IS1-14 Sx2 is a set of two 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators.

The NA-IS1-12 Sx2 is a set of two 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators.

The NA-IS1-12 Sx2 is a set of two 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators.

The NA-SAVP1 chromax.white is a fan accessory set consisting of 16 white NA-AVP1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems.

The NA-SAVP1 chromax.red is a fan accessory set consisting of 16 red NA-AVP1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems.

The NA-SAVP1 chromax.yellow is a fan accessory set consisting of 16 yellow NA-AVP1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems.

The NA-SAV2 chromax.white is a fan accessory set consisting of 20 white NA-AV2 anti-vibration mounts for up to 5 fans. Replacing standard fan screws, the NA-AV2 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.

The NA-SAV2 chromax.red is a fan accessory set consisting of 20 red NA-AV2 anti-vibration mounts for up to 5 fans. Replacing standard fan screws, the NA-AV2 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.

The NA-SAV2 chromax.blue is a fan accessory set consisting of 20 blue NA-AV2 anti-vibration mounts for up to 5 fans. Replacing standard fan screws, the NA-AV2 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.

The NA-SAV2 chromax.black is a fan accessory set consisting of 20 black NA-AV2 anti-vibration mounts for up to 5 fans. Replacing standard fan screws, the NA-AV2 mounts enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.

The NA-FD1 fan duct kit makes it possible to significantly improve the performance of Noctua NH-L9i and NH-L9a series CPU coolers in Small Form Factor (SFF) environments where there is a gap of 5mm or more (up to 45mm) between the cooler and a perforated top or side panel.

The NA-HC8 chromax.black heatsink cover is an add-on accessory for Noctua’s award-winning NH-U12A CPU coolers. Made from high-quality aluminium with black powder-coating finish, it allows users to give the cooler a sleek stealth look that is right at home in all-black builds and goes nicely with many other popular colour schemes.

The NA-HC8 chromax.white heatsink cover is an add-on accessory for Noctua’s award-winning NH-U12A CPU coolers. Made from high-quality aluminium with white powder-coating finish, it allows users to give the cooler a sleek snow-white look that is right at home in all-white or black and white builds.

The NA-HC7 chromax.black.swap heatsink cover is an add-on accessory for Noctua’s award-winning NH-U12A CPU coolers. Made from high-quality aluminium with black powder-coating finish and including swappable inlays in black, white, red, blue, green and yellow, it allows users to colour-customise the cooler in order to coordinate it with popular build colour schemes such as all black, black and white or black and red.